Fenix PD35TAC User Manual

Fenix PD35TAC Flashlight
The Fenix PD35TAC (Tactical edition), remains in pocket-size but in higher performance and
focuses on tactical employment. Measured at less than 14cm long, it features up to 1000
lumen output and throwing distance to 200 meters. In Outdoor Mode, it delivers 6 output
modes including strobe mode. And Tactical Mode strengthens PD35TAC with simplified and
fast output selection. From daily outdoor lighting to professional law enforcement, you can
trustingly resort to PD35TAC.
Technical Parameters
ANSI/FSC
GENERAL MODE
STROBE
TURBO
HIGH
MID
LOW
ECO
OUTPUT
1000
Lumens
500
Lumens
200
Lumens
60
Lumens
8
Lumens
1000
Lumens
TACTICAL
MODE
√
√
√
OUTDOOR
MODE
√
√
√
√
√
√
RUNTIME
1h
10min*
2h
55min
8h
30min
29h
15min
140h
/
DISTANCE
200m(Max)
INTENSITY
10000cd(Max)
IMPACT
RESISTANCE
1m
WATERPROOF
IPX-8，underwater 2m
ACCESSORIES
Body clip、holster、lanyard、2 spare O-rings、spare rubber
switch boot
Notice: The above-mentioned parameters (lab-tested by using Fenix ARB-L2-3400/3400mAh
18650 rechargeable Li-ion battery) are approximate and may vary between flashlights, batteries
and environments.

Fenix PD35TAC Specifications

General

Max Output	1000 lumens
Beam Distance	200 meters
Impact Resistance	1 meter
Surface Treatment	Type III hard-anodized
Reflector	Smooth reflector
Battery Type	1 x 18650 Li-ion or 2 x CR123A
Water Resistance	IP68
Weight (without battery)	89 grams
Head Diameter	25.4 mm
LED	Cree XP-L
Modes	Turbo, High, Mid, Low, Eco, Strobe
Body Diameter	25.4 mm
Material	Aircraft-grade aluminum
Switch Type	Tail switch
Regulation Circuit	Constant current
Lens	Toughened glass
Accessories	Holster, lanyard
Runtime	140 hours