damaged by electrolyte leakage or battery explosion.
◎Remove the battery to prevent accidental activation during storage or transportation.
◎Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with
an approved spare．
◎Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts
may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following
reasons:
A: Poor battery level.
Solution: Replace or recharge the battery (Ensure the battery is inserted according to the
manufacturer’s specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Included
Fenix HT18R flashlight, ARB-L21-5000 V2.0 battery, USB Type-C charging cable, Lanyard, Holster,
Spare O-ring, Red light filter adapter, Green light filter adapter, User manual, Warranty card
To Previous Page
Loading...
