Fenix TK25 - Technical Parameters

Technical parameters
ANSI/PLATO FL1 Turbo High Med Low Strobe
Output
1000
Lumens
300
Lumens
100
Lumens
15
Lumens
1000
Lumens
Runtime
2h
5h
20min
22h
20min
110h /
Distance
225m 124m 75m 25m /
Intensity
12650cd 3840cd 1400cd 160cd /
Impact Resistance
1m
Waterproof
IP68, underwater 2m
Note: The abovementioned parameters (lab-tested by using one Fenix 3.6V/3500mAh
rechargeable Li-ion battery) may vary between flashlights, batteries and environments.
 Uses Cree XP-G2 S3 LED’s with a lifespan of 50,000 hours
 Powered by one rechargeable 18650 Li-ion battery or two 3V CR123A Lithium batteries
 142.6mm Length x 25.4mm Body diameter x 40mm Head diameter
 156.5 grams (excluding battery and belt clip)
 Rotary flashlight head for switching between white and infrared light
 Fitted with 850nm infrared light - compatible with most night-vision devices
 Choices of infrared output: High (3000mW) and Low (1000mW)
 Quick-release belt clip
 Compatible with AER-03 remote pressure switch
 Digitally regulated output maintains constant brightness
 Reverse polarity protection, to protect from improper battery insertion
 Tactical tail switch with instant- and momentary-on activation
 Functional tail switch for output selection and instant strobe activation
 Made of durable aircraft-grade aluminum
 Premium type III hard-anodized anti-abrasive finish