Ferm 107
GB
D
NL
F
E
P
I
S
FIN
N
DK
06 Ferm
PRECISION CIRCULAR SAW FES-350
The numbers in the text refer to the diagrams on pages 2 - 5.
For your own safety and that of others, we recommend that you read this instruction
manual carefully before using this saw. Keep this instruction manual and the
documentation provided with the saw for future reference.
Introduction
This saw is intended for sawing different types of thin material for home use. The Precision
Circular Saw can be used when it is necessary to saw accurately and when it is not desirable to
create any dust, or if there is a risk of sawing pipes or cables. The Precision Circular Saw is
unique because the material to be sawn is clamped by the saw between the base plate and the
work bench. The blade is then pushed into the material to be sawn to produce a quick, easy and
clean result.
Contents
1. Machine information
2. Safety instructions
3. Use
4. Service & maintenance
1. MACHINE INFORMATION
Technical specifications
Voltage | 230 V~50 Hz
Power | 350 W
Sawing depth | 0-12 mm
Speed, unloaded | 4,000 rpm
Max. duty cycle | 3 min/5 min
Reduction | 8.4:1
Balde diameter | 50.8 mm
Weight | 1.2 kg
Max. blade diameter | 50.8 mm
Max/min. blade width | 2 mm / 0.75 mm
Vibration frequency | < 2.5 m/s
2
Noise level | 86.1 dB(A)
Equivalent noise level | 99.1 dB(A)
GB
D
NL
F
E
P
I
S
FIN
N
DK
To Next Page
Loading...
