Ferm FFZ-400N User Manual

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0210/25
Ferm Scroll Saw
FFZ-400N
USER’S MANUAL
Art.nr. 726290
Screwfix Art.nr. 11503
UK Subject to change
Document Ref:
FFZ-40N/11503/PMR25/Issue 1/April 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Ferm FFZ-400N Specifications

General

Brand	Ferm
Model	FFZ-400N
Category	Saw
Language	English

Summary

Safety Instructions

Technical Specifications

Operational Safety

Before Using the Saw

Selecting Saw Blades

Fitting/Changing/Removing Saw Blades

Using the Saw

Before Operating

Checks before powering on the saw, including voltage, blade condition, and initial run.

Operation

Instructions for switching the saw ON and OFF using the green and red buttons.

Cutting

Guidance on workpiece placement, pressure, and blade movement during cuts.

During Use

Maintenance, Care and Repair

Faults

Electrical Information

Wire Correctly

Securing Wires