To Next PageTo Next Page
Need help?Do you have a question about the Ferm FZB-205/1200 and is the answer not in the manual?
Detailed technical specifications including voltage, power, dimensions, and noise levels.
Explanation of symbols used throughout the manual for safety and compliance.
Includes warnings about electrical shock, damage, and general safety precautions.
Further safety guidelines for specific situations and component handling.
Specific safety rules and precautions tailored for bench saw operation.
Instructions for using the emergency stop and main power switch for machine control.
Safety precautions and setup for operating the machine in mitre saw mode.
Step-by-step instructions for performing standard cutting operations.
Settings and safety precautions for table sawing operations.
Step-by-step guide for assembling the machine from its packaging.
Instructions for safely preparing the machine for transport and folding the frame.
Guidelines for safely connecting the machine to the power supply.
Steps to prepare the saw bench before its initial operation.
Proper storage procedures to prevent accidental activation and protect the machine from environmental factors.
Routine checks and lubrication schedule for daily use and after 300 operating hours.
General
