To Next PageTo Next Page
Need help?Do you have a question about the Ferm FKS-180 and is the answer not in the manual?
Wear appropriate safety equipment like glasses, dust masks, gloves, and ear defenders for protection.
Ensure the switch is off before plugging in and avoid carrying plugged-in tools with a finger on the switch.
Keep the work area clean, well-lit, and free from flammable materials; protect from rain or dampness.
Use RCDs for protection against electric shock and avoid contact with grounded surfaces.
Keep children and pets away from the tool, extension cables, and the work area.
Operate the tool with two hands, secure work with clamps, avoid over-reaching, and use the correct tool for the job.
Always unplug before adjustments or blade changes and remove all adjusting keys before switching on.
Instructions on safely removing and installing saw blades using the spindle lock and box spanner.
Tips for steady cutting, keeping shoe contact, avoiding forcing, checking material, and safe handling during use.
General
