Ferm FZT-250 User Manual

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0302-13
Ferm Table Saw
FZT-250
USER’S MANUAL
Art.nr. 720085
Screwfix Art.nr. 19519
UK Subject to change
Document Ref:
FZT-250/19519/PMR27/issue I/Apr 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Ferm FZT-250 Specifications

General

Brand	Ferm
Model	FZT-250
Category	Saw
Language	English

Summary

Technical Specifications

Personal Safety

Guidelines for user protection, including PPE and alertness.

Dress Properly

Recommendations for appropriate clothing and footwear to prevent hazards.

Stay Alert

Emphasizes maintaining focus and avoiding distractions during operation.

Safety Instructions

Operational Safety

Before Using the Saw

Assembling the Riving Knife and Blade Guard

Assembly of the Riving Knife

Step-by-step guide to install the riving knife correctly.

Assembly of the Blade Guard

Detailed instructions for mounting the blade guard.

Changing/Fitting Saw Blades

Assemble and Set Up the Fence

Adjust Blade Height and Blade Angle

Adjusting the Blade Angle

Steps to set the saw blade to a specific bevel angle.

To Adjust the Blade Height Proceed as Follows

Instructions for raising or lowering the saw blade.

Before Operating

Using the Saw

Operation Modes

Explains basic operation, ripping, crosscutting, and compound angles.

Maintenance and Repair

Routine Maintenance

Guidance on cleaning, general care, storage, and lubrication.

Troubleshooting

Identifying and resolving common faults and issues with the saw.

Electrical Information

Details on wiring, plugs, fuses, and cable care.