Need help?Do you have a question about the Ferm FZT-250N and is the answer not in the manual?
Basic safety precautions to reduce risk of fire, electric shock, and personal injury.
Instructions for handling old or new cables and plugs for safe electrical connection.
Guidelines for selecting and using extension cables for the machine.
Comprehensive safety guidelines for operating the power tool safely and effectively.
Check drilling surface for obstacles and verify tool conditions before operation.
Instructions for securing the saw bench to a workbench using drilled holes.
Ensure machine is secured to workbench/frame and screws checked before operation.
Details on rip sawing and cross-cutting methods for various workpieces.
Essential checks to perform before starting any sawing operation.
Procedure for sawing workpieces along the length of the wood grain.
Method for rip sawing at an angle, with specific fence placement.
Troubleshooting steps for when the motor fails to start.
Diagnosing and resolving issues where the workpiece jams during processing.
Causes and solutions for rough or frayed saw cuts.
Addressing problems with workpieces jumping out due to blade contact.
Troubleshooting for blocked adjustment handles.
Identifying causes for the motor not reaching full speed.
Resolving excessive vibration issues during operation.
Guidelines for cleaning ventilation slots and machine housing.
Information regarding the machine's lubrication requirements.
Advice on handling faults and contacting the dealer.
Instructions for recycling packaging and disposing of unwanted machines.
To Next Page
General
