Ferm FKZ-250 User Manual

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0210/24
Ferm 10" Compound Mitre Saw
FKZ-250
USER’S MANUAL
Art.nr. 727250
Screwfix Art.nr. 19638
UK Subject to change
Document Ref:
FKZ-250/19638/PMR29/Issue 1/April 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Ferm FKZ-250 Specifications

General

Brand	Ferm
Model	FKZ-250
Category	Saw
Language	English

Summary

Ferm 10" Compound Mitre Saw FKZ-250

Safety Instructions and Precautions

Personal Safety Equipment

Personal Safety Practices

Operational Safety Guidelines

Dust and Health Precautions

Advises wearing a dust mask and using dust extraction for fine dust generated during operation.

Electrical Safety

Recommends using RCDs, avoiding contact with grounded surfaces, and handling cables carefully.

Safe Tool Operation Practices

Unintentional Starting Prevention

Instructs not to carry plugged-in tools with a finger on the switch and to check the switch position.

Installation and Setup

Dust Collector Bag Installation

Saw Head and Blade Operations

Unlocking the Saw Head

Changing and Fitting Saw Blades

Step-by-step guide for safely replacing the saw blade, including screw and flange removal.

Adjustments and Pre-Use Checks

Adjusting Head and Table Angles

Instructions for setting horizontal and vertical mitre/bevel angles using scales and stop screws.

Fence Adjustment

Pre-Use Checks

Essential checks before operation including voltage, blade condition, and running the saw idle.

Using the Saw

Operation Controls

Cutting Techniques

During Saw Use

Best practices for safe and effective cutting, including clamping, pressure, and blade inspection.

Maintenance, Care, and Faults

Cleaning and Maintenance

Troubleshooting Common Faults

Diagnosing and resolving issues like power failure, poor cutting, noise, and dust extraction problems.

Repair and Servicing