To Next PageTo Next Page
Need help?Do you have a question about the Ferm FLZ-275 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| No load speed | 5000 RPM |
| Arbor size | 30 mm |
| Max. cutting depth at 45° | 50 mm |
| Power source | Corded Electric |
Guidelines for eye protection, proper attire, and alertness while operating the tool.
Advice on concentration, clean work areas, environment, children, tool usage, and reaching.
Rules for avoiding unintentional starts, electric shock, and proper disconnection.
Guidance on using dust extraction, recommended accessories, and cable handling.
Important notes on bench use, material compatibility, and assembly before operation.
Steps for fitting and securing the saw table, including adjusting its angle.
Procedure for ensuring the table is at a 90-degree angle to the blade.
Instructions for cleaning saw chambers and connecting dust extractors.
Guidance on cleaning, storing blades, inspecting tools, and checking for damaged parts.
Steps for safely opening covers, removing old blades, and fitting new ones.
Procedure for adjusting the blade to run centrally on the wheels.
How to position the upper blade guard close to the workpiece.
Instructions for attaching and adjusting the fence and mitre guide.
Ensuring correct blade, power supply, and running the saw idle.
Guidance on applying gentle pressure and proper workpiece handling during cuts.
Instructions for cleaning the tool safely without flammable liquids.
Solutions for issues like overheating, noise, wandering cuts, and slow cutting.
