FERM SCROLL SAW FFZ-400N
USERS MANUAL
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
1. On/off switch
2. Locking arm
3. Cross guide
4. Dust blow pipe
5. Protective cover
6. Tensioner head
CONTENT OF THE PACKING
1 Scroll saw
1 Protective cover
1 Screw for installing the protective cover
2 Saw blades
2 Adapters for universal saw blades
2 Allen key
1 Dust blow pipe
3 Rubber feet
3 Screws with nuts and rings for installing the rubber
feet
1 Cross guide
1 Operating manual
1 Safety manual
1 Warranty card
Check the machine, loose parts and accessories for
transport damage.
SAFETY INSTRUCTIONS
The following warning symbols are used in this operating
manual:
Danger of fatal injury and possible damage to the
machine if the instructions in this manual are not
observed.
An electric current is present.
Carefully read this operating manual before commissio-
ning the machine. Acquaint yourself with its function and
operation. Maintain the machine in accordance with the
instructions so that it will always work faultlessly. This
manual and the accompanying documentation must be
stored near the machine.
Ferm products are manufactured to high quality stan-
dards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear suitable gloves and
apron to protect against sparks/debris. Wear earplugs
or ear defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
To Next Page
Loading...
