5
EN
HAMMER DRILL
HDM1014
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
SAFETY WARNINGS
1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
2
3
4
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
5
7
8
Do not dispose of the product in
9
The product is in accordance with the
applicable safety standards in the
ADDITIONAL SAFETY WARNINGS
FOR HAMMER DRILLS
Asbestos is considered carcinogenic.
if necessary other protective means, such as
safety gloves, safety shoes, etc.
or ceilings for the presence of hidden wiring
and pipes.
with the machine.
dimensions.
cracked, or otherwise damaged.
of loss of control. Risk of personal injury.
surfaces where the accessory may contact
accessory contacts a ‘live’ wire, the exposed
metal parts of the machine can also become
‘live’. Risk of electric shock.
ELECTRICAL SAFETY
3
Always check that the voltage of the
power supply corresponds to the voltage
the mains plug is damaged.
for the power rating of the machine with
a minimum thickness of 1.5 mm
2
a extension cable reel, always fully unroll the
cable.
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue neutral
brown live
To Next Page
Loading...
