Fermax CITY FINGERPRINT READER - Fingerprint + Proximity;Code Mode

Pag 10
FINGERPRINTFINGERPRINT
FINGERPRINTFINGERPRINT
FINGERPRINT
FINGERPRINTFINGERPRINT
FINGERPRINTFINGERPRINT
FINGERPRINT
d 1. 1
1 bip
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
A d d
0 y
0 0 0 1
d 1. 2
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
r e L a
E o t h
A u
d 2
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
x
P r o E
d 1. 1
Enter Programming Mode
Standby Mode 1. Enter the master fingerprint 2. Confirm the Add option with the
validation key
c) Add user Mode 1 Fingerprint + Proximity or Code
3. d1.1 is shown. Enter the user fingerprint you wish to register in the system.
1 beep
1 beep
1 beep
4. d1.2 is shown. Re-enter the user fingerprint you wish to register to confirm the fingerprint.
1 beep 1 beep
1 beep
5. Relay is shown. Using the scroll keys the following sequence will appear relay, both, Au.... There are three
options the action of which associated with this user fingerprint is:
- Relay: to open the door
- both: to open the door and activate the auxiliary exit simultaneously
- Au: to activate the auxiliary exit
Select the required option and confirm using the OK key.
6. d2 is shown. Cancel with "X". The reader is ready (LEDs flashing) for a card or code to be entered (if the
reader has a keypad).
1 beep
Select an option
Accept
7. Bring close the card that you wish to register. If it has registered correctly d1.1 is shown.
1 beep
1 beep