USER’S QUICK GUIDE: DUOX VEO MONITOR

Cod. 970143I V12_18

CONTROL BUTTONS / LED

Digital menu for internal parameter settings and conﬁ guration.

(When the monitor has already been programmed)

In conversation, press to open the door.

In standby, call to guard unit (if applicable).

Auxiliary function, (contact your installer).

In standby, press and it displays the option of auto-starting with

different panels. By sequentially pressing Panel 0, Panel 1, General

Panel, (depending on the available panels).

VEO monitor incorporates an OSD menu that is managed

via the monitor´s push buttons. The icons displayed are

managed with the corresponding buttons located on the

monitor.

The white line at the bottom of the icon indicates the function that is currently in effect.

Select with

the desired icon and conﬁ rm with

USER MENU

1 2

Induction loop label. Located at the internal part of the receiver. (Depending on the model).

1 2

USER PARAMETER SETTINGS

Not

programmed

Standby Call

Called

Operation

LED

Do not

Disturb Mode

Red

Switched on

Slow blinking

Fast blinking

Red Led

Monitor volume settings

Do Not Disturb function

Display images

F2 Function

User parameter settings

Melody selection

Date and time settings

Enable/Disable image capture

User Reset

User help

Enable/Disable Doormatic

Fermax DUOX VEO - User& Installer's Manual

Table of Contents

Other manuals for Fermax DUOX VEO

Related product manuals