Fermax iLoft DUOX User Manual

Page 14
BEEP
+
Default conversation mode on the telephone is "handsfree"
During a "handsfree" conversation, you can reset to simplex conversation mode (press the
button to speak and release to listen).
1. Starting from a handsfree conversation: press the F1 button and
simultaneously until
you hear a "BEEP" and see the blue led fl ashing intermittently, while input audio remains
active (you can hear the panel on the telephone).
Simplex (Push to Talk) conversation mode
Exit ringtone selection (standby):
5. When in the "selecting ringtone from guard unit" if you short
press the
button you will hear a double beep and you
will exit the menu and return to standby.
Note: The last ringtone produced in each menu is saved.
Notes:
- You can also exit the guard unit ringtone menu from the panel, after
inactivity for 10 seconds (storing the last ringtone played). The exit is
confi rmed with a single beep.
- You can also exit the guard unit ringtone menu from reception, after
inactivity for 10 seconds (storing the last ringtone played). The exit is
confi rmed with a double beep.
Conversation
Hands Free
Audio channel
Entry Panel - Residence
BEEP
BEEP
10"
¸

Fermax iLoft DUOX Specifications

General

Brand	Fermax
Model	iLoft DUOX
Category	Intercom System
Language	English