Page 9
AVAILABLE FUNCTIONS
The functions available on the telephone are summarised in the following list:
· Guard Unit Call
· Opening the door
· Call to Guard Unit.
· Ringtone selection.
· Programming from panel and door bell
· Audio connection upon picking up
· Volume regulation
· Auxiliary F1 function.
· Doorbell
· Light and Doorbell Activation
· Hands free audio mode / "simplex (Push to talk)"
· DOORMATIC (depending on confi guration)
CAPACITIES
· Number of terminals per home: maximum 3. Properly size consumption of the power source.
· Number of terminal addresses per sub-block:
99.
· Number of terminal addresses per block: 9999.
·Number of blocks: 99.
·Address for each telephone: 6 decimal digits: 000000. 999999. The address 000000 is the
default address and the telephone does not work.
· Number of conversation channels: 2 per BUS (If there is only audio amplifi ers in the instal-
lation).
· Wiring: 2 non-polarised wires, depending on the wire, distances and terminal charges are
stipulated.
· Number of different optional ringtones: 5.
· Call Volume Regulation.
· Input and output audio volume regulation.
· Maximum conversation time. 90 seconds
· Maximum time to pick up on receiving the call: 30 seconds
· Maximum time to programme the telephone: 2.5 minutes.
To Next Page
Loading...
Need help?
General
