Fermax iloft - Page 67

Pag 27
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoft
27 ºC 10:54
27 ºC 10:54 27 ºC 10:54
Programmer code:
19025
Programming mode
Enter data ( - ) and
confirm ( ).
3.1 User
Programming
Code
Can be modified.
By default 19025.
This code only enables access to the Users Menu Add and Delete options:
(See corresponding chapter, option: 1. Users).
27 ºC 10:54
Programmer code:
19025
27 ºC 10:54
3. Codes
27 ºC 10:54
3.1 Prog. code
3.2 Admin. code
3.3 Master Prox.
27 ºC 10:54
Enter data ( - ) and
confirm ( ).
3.2 Administrator
(Installer) Code
May be modified.
By default 24797.
This code allows access to all the menu options:
(See corresponding chapters).
27 ºC 10:54
Administrator code:
24797
27 ºC 10:54
Programming mode
27 ºC 10:54
Administrator code:
24797
27 ºC 10:54
Programming mode
27 ºC 10:54
1.Users
2.Configuration
3.Codes
4.Timing
5.Message
6.Utilities
3.1 Prog. code
3.2 Admin. code
3.3 Master Prox.
3.1 Prog. code
3.2 Admin. code
3.3 Master Prox.
1.Users
2.Configuration
3.Codes
4.Timing
5.Message
6.Utilities
27 ºC 10:54
1.1 Add
1.2 Delete
27 ºC 10:54
1.Users
27 ºC 10:54
Programming mode
3. Access Control