Ferno 26-S - Limitation of Liability; Limited Warranty

2
© Ferno Washington Italia 26-S - Rel. 241115 ENG
26-S Self-loading Stretcher
© Copyright Ferno Washington Italia s.r.l. All Rights Reserved.
USER AND MAINTENANCE MANUAL
To request additional free copies of the
instruction manual, please contact Ferno
Washington Italia's Customer Services.
Ferno Technical Support
Customer Service and Technical Support are important aspects of
every Ferno product. Before contacting us, note the serial number
of the product and specify it in all written communications. For all
queries concerning technical support, contact Ferno Washington
Italia s.r.l.:
Telephone (toll-free, Italy only) 800 501 711
Fax +39 0516861508
Email info@ferno.it
Ferno Customer Service
For assistance and further information, contact Ferno Washington
Italia s.r.l.'s Customer Services:
MANUFACTURER
Ferno Washington Italia s.r.l., Via Benedetto Zallone 26
40066 - Pieve di Cento (BO) - ITALIA
Telephone (toll-free in Italy) 800 501 711
Phone +39 0516860028
Fax +39 0516861508
Website www.ferno.it
Limitation of Liability
This manual contains general instructions on the use and
maintenance of the product. The instructions do not cover all
possible applications and operations. The user is solely responsible
for proper and safe use of the product. The safety information is
provided as a service to the user and ensures only the minimum
required level of safety to prevent injury to operators and patients.
Any other safety measure implemented by the user must comply
with applicable regulations. Before using the product, it is strongly
recommended that staff be trained in its correct usage. Retain
this manual for future reference. In case of change of ownership,
ensure that the manual remains with the product. Additional free
copies can be obtained from Ferno Washington Italia's Customer
Services.
Intellectual Property Declaration
The information in this manual is the property of Ferno Washington
Italia s.r.l. of Via Benedetto Zallone 26, 40066 Pieve di Cento
(BO), Italy.
All patent rights, design rights, construction, reproduction, use and
sale relating to any item covered in this manual are the condential
and exclusive property of Ferno Washington Italia s.r.l., except for
rights expressly transferred to third parties or not attributable to
parties owned by the supplier. It is prohibited to reproduce this
manual, either in full or in part, without the prior consent of Ferno
Washington Italia s.r.l..
Limited Warranty
The products sold by Ferno are covered by a 24-month warranty
against manufacturing defects. For the full terms and conditions of
warranty and liability, see the Warranty chapter.
Compliance with safety regulations
The self-loading stretcher is designed and manufactured
by Ferno Washington Italia S.r.l. in complaince with the
safety requirements laid down by Directive 93/42/EEC
dated 14/06/93 (class I) regarding medical devices. All the
materials used are sized in order to operate properly within
the load limits given in the technical specications, and are
resistant to ame, produce no toxic or polluting substances,
and are protected to ensure a high resistance to wear and
corrosion. The design of the stretcher eliminated sharp edges
that may cause accidental injury to the personnel using it.
WARNING
Photos identied by "**" are for illustrative purposes
only. Please read the instructions carefully. The picture
does not represent the product described in this instruction
manual, but only correct usage and functionality.