Ferno 26-S - General Technical Specifications; Stretcher Positions

8
© Ferno Washington Italia 26-S - Rel. 241115 ENG
26-S Self-loading Stretcher
General technical specications
Ferno reserves the right to change the specications without
notice. For more details, please contact Ferno's Customer
Service.
Specications
Loading capacity 400 lbs 181 kg
Weight** 73 lbs 33 kg
Patient Height
Maximum Setting 31 in 800 mm
Minimum Setting 17 in 450 mm
Length
Maximum 77.56 in 1920 mm
Minimum 77 in 1957 mm
Width
Total 21.65 in 550 mm
Wheels
Diameter 3 in 100 mm
Width 1.6 in 40 mm
Materials
Structure aluminium
Panels ABS
Wheel bearings sealed
Loading height*
Loading level 24/25 in 610/640 mm
Stretcher positions
**Transport position
**Completely closed
* The loading height is the distance between the ground and
the lower part of the oor-level wheels.
** The weight of the stretcher does not include mattress and
restraints.
The load limit includes the weight of the stretcher, the
patient, the equipment and, in some situations, and the
rescuer. Exceeding this limit may result in harm to the
patient and / or the stretcher.
The dimensions are rounded to integers. As a result of
product improvements, these specications are subject to
change without notice.
For all other questions, contact customer service (see the
"Customer Service" section).
Technical specications
The stretcher is equipped with:
• Leg-locking bar
• Leg-actuating levers
• Safety rod
• Collapsible side rails
• Adjustable backrest
• Foldable frame
• Anti-shock frame
- Wheel brakes
WARNING
Photos identied by "**" are for illustrative purposes
only. Please read the instructions carefully. The picture
does not represent the product described in this instruction
manual, but only correct usage and functionality.