6
© Ferno Washington Italia 26-S - Rel. 241115 ENG
26-S Self-loading Stretcher
THE STRETCHER
Description
The 26-S stretcher (known simply as the "stretcher" in this
document) is a device for handling patients in emergency
situations and is designed for transporting the patient in an
ambulance. It allows you to carry a patient securely thanks
to the system of safety restraings (for the restraints, see the
Accessories chapter.)
The stretcher should be used only by trained and qualied
staff. The stretcher is for professional use by at least two
qualied operators. It was designed to reduce the risk of
back injuries to healthcare workers. Additional assistance
may be required to handle heavy patients and/or when
the situation demands it, and should always be provided
according to local health protocols.
The stretcher has been designed to be used exclusively with
Ferno ambulance locking systems (for available locking
systems, see Accessories.)
WARNING
Improper use of the stretcher can cause damage
and / or injury. Use the 26-S stretcher as described
in this manual.
STRETCHER COMPONENTS
● Head-end carrying handle
● Control handles on rear legs
● Loading wheels
● Backrest adjustment lever
● Adjustable back
● Front legs
● Rear legs
● Front wheels, diameter 100 mm)
● Collapsible side rails
● Control for mechanical release of rear legs
● Rear wheels, diameter 100 mm with integrated brake
system
● Shock-proof frame
● Mechanical rear leg release system
● Leg locking system
● Foot-end carrying handle
WARNING
Untrained users may injure themselves, cause
damage and/or physical harm. Allow only trained
and qualied sta to use the 26-S stretcher.
WARNING
The use of improper and/or unauthorised devices
can cause accidents, damage and/or injury. Use only
devices that have been approved and authorised by
Ferno Washington Italia.
CE Compliance
MEDICAL DEVICES DIRECTIVE
Ferno's products meet the requirements of European
Directive 93/42/EEC concerning medical
devices. The stretcher is a Class I device.
For more information: www.ferno.it