12
3. Device description (Fig. A , N, O)
1. Front hand guard
2. Front handle
3. Air lter cover
4. Start pull cord
5. Lock for the air lter cover
6. On/o switch
7. Fuel pump primer
8. Cold start lever (choke)
9. Throttle interlock
10. Throttle
11. Rear handle
12. Rear hand guard
13. Fuel tank cap
14. Chain oil tank cap
15. Claw stop (pre-assembled)
16. Guide bar
17. Saw chain
18. Bench grinder aid
19. Oil adjustment screw
20. Fixing nuts
21. Chain tensioning screw
22. Chain cover
23. Chain tensioning pin
24. Chain catcher
25. Hole for the chain tensioning pin
26. Chain wheel
27. Guide bar cover
28. Spark plug wrench / slotted screwdriver
29. Round saw chain le
30. Screwdriver
31. Mixing container
32. Air lter
33. Spark plug connector
Device description
To Next Page
Loading...
