To Next PageTo Next PageWhat to do if the FERREX CSP50 Chainsaw engine starts up but does not have full power?
If the FERREX Chainsaw engine starts but lacks full power, the cause may be a contaminated air filter (32). Clean the air filter (32) to resolve this.
Why does the FERREX CSP50 engine run erratically?
An erratic engine in your FERREX Chainsaw can be due to a wrong spark plug electrode gap. To fix this, clean the spark plug and adjust the electrode gap, or fit a new spark plug.
Why is the spark plug sooty or damp in my FERREX CSP50?
A sooty or damp spark plug in your FERREX Chainsaw may be caused by an incorrect carburettor setting. You should have the carburettor adjusted and, if necessary, clean the spark plug or replace it with a new one.
Lists the items provided with the chainsaw upon purchase.
Details the intended use of the chainsaw and restrictions for safe operation.
Covers attentiveness, avoiding misuse, reading manuals, and operator responsibility.
Mandatory safety gear to be worn, including helmet, goggles, clothing, and gloves.
Guidelines for safely storing and transporting the chainsaw.
Notes on noise regulations, ventilation, weather conditions, and keeping the work area clear.
Instructions and warnings for safely mixing and filling fuel.
Essential checks and inspections before operating the chainsaw.
Addresses risks associated with vibration and recommended breaks.
Details how to prevent and react to dangerous kick-back situations.
Highlights remaining dangers like cuts, burns, and kick-back.
Detailed instructions for assembling the guide bar and ensuring proper chain tension.
Instructions for correctly mixing petrol and 2-stroke oil for the engine.
Procedure for safely filling the chainsaw's fuel tank with the correct mixture.
Instructions for refilling the chain lubrication oil reservoir.
Detailed steps to ensure the saw chain is correctly tensioned and secure.
Procedures for starting the engine, both cold and warm.
Describes the normal and emergency procedures for stopping the chainsaw's engine.
Guidance on idle speed operation and potential adjustments needed.
Ensuring adequate chain lubrication and how to adjust the oil flow.
Procedures for verifying the proper function of the chain brake mechanism.
Safe practices for using the chainsaw during felling operations.
Steps for making the initial notch cut to direct the tree's fall.
Instructions for executing the final cut to fell the tree safely.
Techniques for removing branches from a felled tree.
Procedure for cutting branches bent downwards safely and effectively.
Procedure for cutting branches bent upwards safely and effectively.
Procedures for cleaning the engine housing, cooling fins, and air vents.
How to clean the air filter to maintain engine performance.
Steps for cleaning the saw chain, guide bar, and drive components.
Instructions for checking, cleaning, and maintaining the spark plug.
Procedures for checking and maintaining the chain oiling system.
Guidance on when and how to adjust carburettor settings.
Tips for maintaining the guide bar for optimal performance and longevity.
Instructions for sharpening the saw chain for efficient cutting and reduced wear.
Schedule for performing maintenance tasks based on usage and condition.
Lists parts subject to wear and required consumables.
General| Power Source | Petrol |
|---|---|
| Weight | 5.5 kg |
| Engine Displacement | 50 cm³ |
| Chain Pitch | 0.325 inches |
| Oil Tank Capacity | 0.26 L |
