EasyManuals Logo

Ferris 400S Series User Manual

Ferris 400S Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Not for
Reproduction
25
ZERO-TURN RIDER AND MOWER MAINTENANCE
Before each use
Check the safety interlock system.
Check the rider's brakes.
Check rider and mower for loose hardware.
Clean visible debris from rider and mower deck.*
Check hydraulic oil level.
Every 25 Hours
Clean deck and Check / Replace mower blades.*
Lubricate rider and mower deck.*
Check tire pressures.
Every 100 Hours
Check mower blade stopping time.
Clean battery and cables.
See dealer for initial change of hydraulic oil.
Every 400 Hours or Yearly
See dealer for hydraulic oil and filter change.
ENGINE MAINTENANCE
Before each use
Check engine oil level.
Clean visible debris from engine compartment*
Every 50 Hours
Inspect / Clean spark arrester.**
Refer to engine owner's manual
Service air filter.
Change engine oil and filter.
Check / Replace spark plugs.
Check / Replace fuel filter.
*More often in hot (over 85° F; 30° C) weather or dusty operating
conditions.
**If equipped. Replace if damaged.
Specifications
Specifications are correct at time of printing and are subject to
change without notice.
ENGINE
For complete engine specifications see the engine
manufacturer's operator's manual included with your unit.
Fits models:5901076, 5901729, & 5901740
Briggs & Stratton 44C777
Make Briggs & Stratton
Model 44C777-0005-G1
Electrical System 12 volt, 9 amp alternator; Battery:
230 cca
CHASSIS
Fuel Tank Capacity 5.5 gallons (20,8 L) total
Rear Wheels
Tire Size 20 X 10 - 10
Inflation Pressure 12 psi (0,83 bar)
Front Wheels
Tire Size (Serial Number
4000771923 and below)
11 X 4 - 5
Tire Size (Serial Number
4000771924 and above)
11 X 6 - 5
Inflation Pressure 22 psi (1,52 bar)
TRANSMISSIONS
Model 5901729 Only:
LH ZH-JPBB-3F7B-2XLX (1759446)
RH ZH-MPBB-3F7C-3XLX (1759445)
Type ZT-2800 Transaxles
Hydraulic Fluid SAE 20W-50 motor oil
Forward: 0-7.5 mph (0-12 km/h)Speeds @ 3400 rpm
Reverse: 0-4 mph (0-6,4 km/h)
All Other Models:
LH ZJ-HPEE-3F7B-29LX (5106102)
RH ZJ-LPEE-3F7C-39LX (5105601)
Type ZT-3100 Transaxles
Hydraulic Fluid SAE 20W-50 motor oil
Forward: 0-7.5 mph (0-12 km/h)Speeds @ 3400 rpm
Reverse: 0-4 mph (0-6,4 km/h)
DIMENSIONS
Overall Length 69-7/8" (177,5 cm)
Overall Width (with deflector up) 53" (134,6 cm)
Overall Width (with deflector down) 58-1/2" (148,9 cm)
Height 46-1/2" (118 cm)
Weight (approximate) 753 lbs (341,5 kg)
Warranty
If your unit is equipped with a dual function hour meter that
displays both engine hours and PTO hours, the warranty is
based on the engine hours as displayed by the hour meter.
Warranty Statement
BRIGGS & STRATTON WARRANTY POLICY (January 2014)
LIMITED WARRANTY
Briggs & Stratton warrants that, during the warranty period
specified below, it will repair or replace, free of charge, any
part that is defective in material or workmanship or both.
Transportation charges on product submitted for repair or
replacement under this warranty must be borne by purchaser.
This warranty is effective for and is subject to the time periods
and conditions stated below. For warranty service, find the
nearest Authorized Service Dealer in our dealer locator
map at ferrismowers.com .The purchaser must contact
the Authorized Service Dealer, and then make the product
available to the Authorized Service Dealer for inspection and
testing.

Other manuals for Ferris 400S Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ferris 400S Series and is the answer not in the manual?

Ferris 400S Series Specifications

General IconGeneral
Transmission TypeHydrostatic
Deck ConstructionFabricated
Caster Tires13 x 6.5 - 6
Cutting Height1.5 in
Deck MaterialSteel
Drive Tires20x10-8
Wheel Size13 x 6.5 - 6

Related product manuals