IS3100Z Series - 4 Wheel IS - 61” & 72” Mower Deck
2
Quick Setup List -
Page Setup Procedure Steps to Perform
3 Uncrating ❏ Remove Crate & Banding.
❏ Loosen Hydraulic Release Valves.
❏ Release Parking Brake and Roll Tractor forward off skid.
❏ Tighten Hydraulic Release Valves.
3 Connect Battery ❏ Connect Battery.
4 Tractor Assembly ❏ Assemble the Motion Control Handles.
❏ Assemble the Seat.
5 Roll Bar Assembly ❏ Assemble the Retainer Pins.
❏ Assemble the Top Loop.
❏ Install the Roll Bar.
7 Check Fluid Levels ❏ Check Engine Oil level.
❏ Check Hydraulic Oil level.
❏ Check Engine Coolant level.
❏ Check Tire Pressure.
8 Mower Assembly ❏ Check Blade Bolt Torque.
❏ Install Deck Pusher Bars.
❏ Install the Mower Deck.
❏ Check & Adjust Deck Lift Rod Timing
❏ Check & Level Mower Deck.
❏ Install & Check Deck Drive Belt.
15 Lubrication & ❏ Lubricate all grease & oil points.
Fuel Preparation ❏ Add Fuel.
❏ Start the Engine.
17 SAFETY CHECKS ❏ Check for LOOSE HARD
WARE.
❏ Check all OPERA
TOR CONTROLS.
❏ Perform SAFETY INTERLOCK SYSTEM CHECK
.
To Next Page
Loading...
