20
www.ferrisindustries.com
20
www.ferrisindustries.com
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your mower. You will need to keep a record of
your operating time.
Regular Maintenance
UNIT MAINTENANCE
Before Each Use
Check Safety Interlock System
Check Rider Brakes
Check Mower Blade Stopping Time
Check Rider / Mower for loose hardware
Check Tire Pressure
Check Hydraulic Oil Level
Every 25 Hours
Clean Deck & Check / Replace Mower Blades
Lubricate Rider & Mower
Every 100 Hours
Clean Battery & Cables
Every 200 Hours
Change Hydraulic Oil & Filter
ENGINE MAINTENANCE
Before Each Use
Check Engine Oil Level
Every 25 Hours
Check / Clean Cooling Fins & Intake*
Every 50 Hours
Check / Clean Spark Arrester**
Refer to Engine Manufacturer’s Owner’s Manual
Service Air Filter
Change Oil Filter
Check / Replace Spark Plugs
Check / Replace Fuel Filter
* More often in hot (over 85° F; 30° C) weather or
dusty operating conditions.
* More often in hot (over 85° F; 30° C) weather or
dusty operating conditions.
** If equipped. Replace if damaged.
To Next Page
Loading...
Need help?
General
