Ferrofish A32 - Page 14

Operation
12
main menu – SETUP -> MADI
The A32 has two MADI formats (one optical and one coaxial) which can
be used in a very flexible way:
1 - optical
The A32 only uses the optical MADI
input. No automatic switching between
the formats will happen.
2 - optical
The A32 uses the optical MADI input.
When the signal is lost, the A32 switches
to coax MADI. It will only switch back to
optical if the coax signal is subsequently
removed.
3 - optical
Same function as 2. In addition, both
inputs are scanned constantly and if no
signal is present on one a warning will be
shown on the main screen.
4 – coax
The A32 only uses the coax MADI input.
No automatic switching between the
formats will happen.
5 – coax
The A32 uses the coax MADI input.
When the signal is lost, the A32 switches
to optical MADI. It will only switch back
to coax if the optical signal is
subsequently removed.
6 – coax
Same function as 5. In addition, both
inputs are scanned constantly and if no
signal is present on one a warning will be
shown on the main screen.