To Next PageTo Next PageWhat does card parameter fault mean in Ferroli Boiler?
If your Ferroli Boiler displays 'Card parameter fault', it is likely due to a faulty gas valve or wrong card parameter setting. To resolve this, check the card parameter and modify it if necessary.
What causes Controller DBM32 fault in Ferroli DIVA F37?
If your Ferroli Boiler is showing a Controller DBM32 fault, it's likely due to an internal error. Check the earth connection and replace the controller if necessary.
General| Power Output | 37 kW |
|---|---|
| DHW Output | 37 kW |
| Efficiency Class | A |
| ERP Rating | A |
| Dimensions (HxWxD) | 700 x 400 x 330 mm |
| Ignition | Electronic |
| Heat Exchanger Material | Stainless Steel |
| Type | Combi |
| Fuel Type | Natural Gas |
| Water Pressure | 1-3 bar |
Important safety and operational notes for boiler installation and use.
Guidance on boiler operation, including introduction and control panel.
Procedures for adjusting boiler settings like temperature and modes.
Comprehensive guide to installing the boiler unit.
Instructions for connecting water pipes and system characteristics.
Procedures for connecting the gas supply to the boiler.
Procedures for boiler servicing, maintenance, and troubleshooting.
Procedures for regular servicing and inspection of the boiler.
Guidance on diagnosing and resolving boiler faults.
Detailed specifications and performance data for the boiler models.
Comprehensive table of technical specifications and performance data.
