How to troubleshoot a card parameter fault on a Ferroli Boiler?
If the Ferroli Boiler displays a card parameter fault, it means there is a wrong card parameter setting. Therefore, you should check the card parameter and modify it if necessary.
Why is the supply voltage under 180V on my Ferroli Boiler?
If the Ferroli Boiler indicates a supply voltage under 180V, it's likely due to electric mains trouble. Check the electrical system.
What to do if my Ferroli Boiler shows a faulty mains frequency?
If the Ferroli Boiler indicates a faulty mains frequency, it's likely due to electric mains trouble. Check the electrical system.
What causes a poor combustion fault in Ferroli DIVAtech F 24 D Boiler?
If the Ferroli Boiler indicates poor combustion fault due to inlet/exhaust flue obstruction, you should check the flue.
Details boiler features and explains the control panel functions, symbols, and display.
Guides on connecting power, turning the boiler on/off, and selecting modes.
Covers DHW, room temp, eco/comfort selection, and sliding temperature adjustments.
Covers general instructions, place of installation, and ventilation requirements.
Details water, gas, and electrical connections, including terminal block access.
Explains fume duct types, installation, and the use of baffles.
Details coaxial pipe types, starting accessories, and baffles for installation.
Covers separate pipe types, starting accessories, baffles, and loss calculation.
Covers gas conversion, TEST mode activation, and burner pressure adjustments.
Details checks before and during boiler operation for safe startup.
Outlines essential annual checks for control devices and system integrity.
Explains how the boiler's advanced self-diagnosis system indicates faults.
Lists fault codes, possible causes, and suggested cures for boiler issues.
Provides a key to identify main components and diagrams of water circuits.
Presents a table with key technical data, including capacities and pressures.
Illustrates pressure-power relationships and pump head/pressure loss curves.
Shows the detailed electrical circuit connections for the boiler's components.
States the boiler's compliance with relevant EU directives for gas, efficiency, and safety.
To Next Page
General