What causes a flue gas sensor fault in Ferroli ECONCEPT 50 A Boiler?
If the flue gas sensor on your Ferroli Boiler is faulty, it could be due to a damaged sensor or cut wiring. Check the wiring and replace the sensor if needed.
What to do if the domestic hot water sensor is faulty in Ferroli ECONCEPT 50 A Boiler?
If the domestic hot water sensor is faulty on your Ferroli Boiler, it might be due to a damaged sensor or cut wiring. Inspect the wiring, and if necessary, replace the sensor.
How to increase water system pressure in Ferroli Boiler?
If the water system pressure is insufficient in your Ferroli Boiler, it might be because the system is empty. Fill the system to a pressure of 1.5 bar to resolve this issue.
What causes an outlet sensor fault in Ferroli ECONCEPT 50 A Boiler?
If the outlet sensor on your Ferroli Boiler is faulty, it could be due to a damaged sensor or cut wiring. Check the wiring and replace the sensor if necessary.
Why is the central heating return temperature too high in my Ferroli ECONCEPT 50 A?
If the central heating return temperature is excessively high in your Ferroli Boiler, it is likely due to no system circulation. Check both the system and the pump to ensure they are functioning correctly.
What to do if there is a fan fault in Ferroli ECONCEPT 50 A?
If your Ferroli Boiler displays a fan fault, it could be because the fan is not receiving power or the fan is defective. First, check the wiring to the fan. If the wiring is correct, the fan may be defective and needs replacement.
Why is there no flame after ignition in my Ferroli ECONCEPT 50 A?
If there is no flame following the ignition phase in your Ferroli Boiler, it could be due to low gas pressure, a faulty ionization probe, or a faulty full auto control. Check each of these components as necessary.
What causes high flue gas temperature in Ferroli Boiler?
If your Ferroli Boiler shows a high flue gas temperature, the flue may be partially blocked or not sufficiently sized. To resolve this, check the efficiency of the flue, the flue gas exhaust pipes, and the outlet terminal.
Why does the safety thermostat activate on my Ferroli ECONCEPT 50 A Boiler?
If the safety thermostat activates on your Ferroli Boiler, it could be due to an inactive outlet sensor. Check the correct positioning and operation of the outlet sensor. Alternatively, there might be no system circulation, so inspect the pump.
What to do if the flue safety device intervenes in Ferroli ECONCEPT 50 A?
If the flue safety device intervenes in your Ferroli Boiler, it is likely due to a partially blocked or insufficient flue. Check the efficiency of the flue, the flue gas exhaust pipes, and the outlet terminal to resolve this issue.
General| Fuel Type | Natural Gas / LPG |
|---|---|
| Nominal output | 50 kW |
| Efficiency Class | A |
| NOx Class | 5 |
| Max working pressure | 3 bar |
| Mounting | Wall-mounted |
| DHW Output (kW) | 50 |
To Next Page