Why is the central heating outlet temperature too high on my Ferroli Boiler?
If the central heating outlet temperature of your Ferroli Boiler is excessively high, it could be due to a blocked or faulty pump. Try freeing the pump by removing the cap and rotating the shaft with a screwdriver. If that doesn't work, the pump may be faulty, so check or replace the condenser or the pump itself.
How to fix failed burner assembly ignition on Ferroli ECONCEPT 50 A?
If the Ferroli Boiler burner assembly fails to ignite, it could be due to several reasons. First, ensure that gas is flowing correctly to the boiler and that any air has been purged from the piping. Second, inspect the ignition or detection electrode for wiring issues, correct positioning, and any deposits. Finally, a defective gas valve could be the culprit, requiring a check and potential replacement.
What to do if there is insufficient water system pressure in my Ferroli ECONCEPT 50 A?
If you have insufficient water system pressure in your Ferroli Boiler, it's likely the system is empty. Fill the system to 1.5 bar to resolve this issue.
General| Fuel Type | Natural Gas / LPG |
|---|---|
| Nominal output | 50 kW |
| Efficiency Class | A |
| NOx Class | 5 |
| Max working pressure | 3 bar |
| Mounting | Wall-mounted |
| DHW Output (kW) | 50 |
To Next Page