Ferroli ECONCEPT TECH 25 C - Page 5

ECONCEPT TECH 25 C
5EN
cod. 3540I371 - 06/2008 (Rev. 00)
Indication during operation
Heating
A heating demand (generated by the Room Thermostat or Remote Timer Control) is indicated by flashing of the hot air
above the radiator (details 13 and 14 - fig. 1).
The display (detail 11 - fig. 1) shows the actual heating delivery temperature and during DHW standby time, the mes-
sage “d2”.
fig. 2
Domestic hot water (DHW)
A DHW demand (generated by drawing domestic hot water) is indicated by flashing of the hot water under the tap (de-
tails 8 and 9 - fig. 1).
The display (detail 11 - fig. 1) shows the actual DHW outlet temperature and during DHW standby time, the message
“d1“.
fig. 3
Comfort
A Comfort demand (restoration of temperature inside the boiler), is indicated by flashing of the water under the tap (de-
tail 9 - fig. 1).
The display (detail 11 - fig. 1) shows the actual temperature of the water contained in the boiler.
fig. 4
eco
comfort
reset
eco
comfort
reset
eco
comfort
reset
eco
comfort
reset
eco
comfort
reset