40
To enter the HOLIDAY AWAY SETTING, go to MENU> FOR S ERVICEMAN> HOLIDAY
AWAY SETTING. Press OK. The following page is displayed:
When the cursor is on T1S_H.A._H or T5S_H.M_DHW, Use◄ ► and ▼ ▲ to scroll and adjust the parameter, T1S_H.A._H is
the target outlet water temperature for space heating when in holiday away mode.
T1S_H.M_DHW is the target outlet water temperature for water heating when in holiday away mode.
Holiday away setting
The HOLIDAY AWAY SETTING is used to set the outlet water temperature to prevent freezing when away for holiday.
8 HOLIDAY AWAY SETTING
T1S_H.A_H
T5S_H.M_DHW
20
°C
15
°C
SCROLL
SETUP OF THE SYSTEM
How to set the SERVICE CALL
To set the SERVICE CALL, go to MENU> FOR SERVICEMAN> SERVICE CALL. Press
OK. The following page is displayed:
Use ▼ ▲ to scroll and set the phone number. The maximum length of the phone number
is 13 digits, if the length of phone number is short than 12, please input ■, as shown
below:
Service call
About SERVICE CALL
The installers can set the phone number of the local dealer in SERVICE CALL. If the unit doesn’t work properly, call this number
for help.
9 SERVICE CALL
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
ADJUST SCROLLCONFIRM
OK
9 SERVICE CALL
PHONE NO. ****************
MOBILE NO. ****************
ADJUST SCROLLCONFIRM
OK
To restore factory settings, go to MENU> FOR SERVICEMAN> RESTORE FACTORY
SETTINGS. Press OK. The following page is displayed:
Use ◄ ► to scroll the cursor to YES and press OK. the following page will be displayed:
After a few seconds, all the parameters set in the user interface will be restored to factory settings
Restore factory settings
The RESTORE FACTORY SETTING is used to restore all the parameters set in the
user interface to the factory setting.
10 RESTORE FACTORY SETTINGS
All the settings will revert to
factory default. Do you want to
restore factory setting?
SCROLLCONFIRM
OK
NO YES
10 RESTORE FACTORY SETTINGS
Please wait…
5%
To Next Page
Loading...
Need help?
General