Ferroli RXA-I PLUS Series User Manual

12
Always the ECO mode is used combined with comfort mode.
■ If TIMER is on, ECO or COMFORT mode is on,ECO or
COMFORT mode run according to the TIMER.
■ If TIMER is OFF, the ECO and COMFORT mode are both
on, the ECO is active and the COMFORT is not active.
■ If CURRENT STATE is OFF, the ECO/COMFORT is active.
The unit run ECO MODE from 19:00 until tomorrow 8:00
and run COMFORT MODE from 8:00 until 19:00.
Use ''◄'',''►'',''▼'',''▲'' to scroll and use ''▼'',''▲'' to adjust
the parameters when setting ''OPERATE DAY'' and ''START''.
If the OPERATE DAY is set FRIDAY and the START is set
23:00,the disinfect function will active on 23:00 Friday.
If CURRENT STATE is OFF, DISINFECT is not active.
If the disinfect function is running,the following page will ap-
pear:
INFORMATION
INFORMATION
PRESET TEMPERATURE
PRESET
TEMP.
ON
WEATHER
TEMP. SET
ECO
MODE
ECO TIMER
END
COMFORT
MODE
START
CURRENT STATE
SCROLLADJUST
ON
19 ：00
08 ：00
PRESET TEMPERATURE
PRESET
TEMP.
OFF
WEATHER
TEMP.SET
ECO
MODE
ECO TIMER
END
COMFORT
MODE
START
CURRENT STATE
SCROLLADJUST
ON
8 ：00
19 ：00
08:00
ECO MODE COMFORT MODE ECO MODE
19:0024
:
00
DISINFECT
The DISINFECT function is used to kill the legionella. In disin-
fect function the tank temperature will be reached 65~70°C.
To set the parameters of this function refer to section "SETUP
OF THE SYSTEM" in the Installation and maintenance ma-
nual.
Go to ''MENU'' > ''DOMESTIC HOT WATER'' > ''DISINFECT''.
Press ''OK''. The following page will appear:
Domestic Hot Water (DHW)
DOMESTIC HOT WATER（DHW）
DIS-
INFECT
ON
FAST
DHW
TANK
HEATER
OPERATE DAY
DHW
PUMP
START
FRI
23:00
CURRENT STATE
SCROLLON/OFF
ON/OFF
DOMESTIC HOT WATER（DHW）
DIS-
INFECT
OFF
FAST
DHW
TANK
HEATER
OPERATE DAY
DHW
PUMP
START
FRI
23:00
CURRENT STATE
SCROLLON/OFF
ON/OFF
ON/OFF ON/OFF
23: 55 10 - 08 - 2015 FRI.
CONTROL SYSTEM

Ferroli RXA-I PLUS Series Specifications

General

Brand	Ferroli
Model	RXA-I PLUS Series
Category	Heat Pump
Language	English