19
About service information
Service information menu contents as following:
1) service call: to check service call for contacting;
2) error code: to check the error code mean;
3) parameter: to review the operation parameters;
4) display: to set the display.
■ Go to ''MENU'' > ''SERVICE INFORMATION''. Press ''OK''
SERVCE CALL
The following page will appear:
■ The service call can show the service phone or mobile
nember. The installer can input the phone number. See FOR
SERVICEMAN,
ERRORE CODE
Error code is used to show when the fault or protection hap-
pen and show the mean of the error code.
Press OK the page will appear:
Press OK to show the mean of the error code:
PARAMETER
The parameter function is used to display the main working
parameters.
DISPLAY
The display function is used to set the interface, the main
items is language, backlight, buzzer and screen lock time:
Use ''OK'' to enter and use ''◄'',''►'',''▼'',''▲'' to scroll.
Information:
Now there is only one language English in the interface.
Service information
SERVICE INFORMATION
DISPLAY
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
ERROR
CODE
SCROLL
PARAMETERSERVICE
CALL
12:30 08-08-2015 SAT.
E2 comunication fault between
controller and indoor unit
Please contact your dealer.
CONFIRM
OK
SERVICE INFORMATION
DISPLAYSERVICE
CALL
E2
E2
E2
14:00 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
SCROLLENTER
OK
PARAMETERERROR
CODE
E2 14:10 01-08-2015
12:30 08-08-2015 SAT.
E2 comunication fault between
controller and indoor unit
Please contact your dealer.
CONFIRM
OK
To Next Page
Loading...
Need help?
General