17
You can use ''▼'',''▲'' to select level 1 or level 2. Press ''OK''.
If the silent TIMER is selected, Press “OK” to enter, the fol-
lowing page will appear.
HOLIDAY
AWAY
HOLIDAY
HOME
BACKUP
HEATER
OPTIONS
SILENT
MODE
NO.START
22:00
T1
T2
END
12:00
07:00
15:00
SCROLL
There are two timers for setting.Move to “■”, press '' OK '' to
select or unselect.
If both time bands are unselected, the silent mode will opera-
te in all time. Otherwise, it will operate according to the time
band.
HOLIDAY AWAY
■ If the function HOLIDAY AWAY is active, will display on
the home page.
This function is used to "soften" the unit's activities still kee-
ping active all the antifreeze functions in the event of a pro-
longed absence (due eg. To a vacation). The function also
allows you to have all previous settings at the end of the va-
cation.
Go to ''MENU'' > ''OPTIONS'' > ''HOLIDAY AWAY''.
Press ''OK'' . The following page will appear:
Usage example: You go away during the winter. The current
date is 2016-01-31, two days later is 2016-02-02, it is the
beginning date of the holiday.
If you are in the following situation:
■ In 2 days, you go away for 2 weeks during the winter.
■ You want to save energy, but prevent your house from fre-
ezing.
Then you can do the following:
1) Configure the holiday. configure the following settings:
2) Activate the holiday mode.
Go to ''MENU'' > ''OPTIONS'' > ''HOLIDAY AWAY''.
Press ''OK'' .
Use ''ON/OFF'' to select ''OFF'' or ''ON'' and use ''◄'', ''►'',
''▼'', ''▲'' to scroll and adjust.
HOLIDAY
AWAY
HOLIDAY
HOME
BACKUP
HEATER
OPTIONS
OFF
OFF
OFF
ON
SILENT
MODE
SCROL
07-08-2015
07-08-2015
Setting Value
Holiday away ON
From
2 February 2016
Until 16 February 2016
Operation mode
Heating
Disinfect ON
■ If DHW mode in holiday away function is ON, The disinfect
function set by the user is not active.
■ If holiday away function is ON, the timer and weekly sche-
dule are not active.
■ If the CURRENT STATE is OFF, the HOLIDAY AWAY is OFF.
■ If the CURRENT STATE is ON, the HOLIDAY AWAY is ON.
■ If HOLIDAY AWAY is ON the remote control doesn’t accept
any orders.
■ Disinfect function will be activated on 23:00 of the day be-
fore the return from your vacation.
INFORMATION
CONTROL SYSTEM
To Next Page
Loading...
Need help?
General