user’s manual
WANDLA by Ferrum
12
● MSB 32 bits - MSB/left-justified: no word clock advancement and high level for left channel�
● I2S Input DSD - PinYou can choose pin of I2S connector used to select DSD format� Please read the manual
of your source device ti find out which pin is usef to select DSD format�
— None
— Pin 13
— Pin 14
— Pin 15
— Pin 16
7�3�3 VISUALS
Contains visual settings�
7�3�3�1 Display Brightnes
Brightness of display in percent� It is relative to ambient brightness level or absolute when the ambient sensor
is disabled�
7�3�3�2 Logo Brightnes
Brightness of Ferrum logo in percent� It is relative to ambient brightness level or absolute when the ambient
sensor is disabled�
7�3�3�3 Logo Stb Brightnes
Brightness of the Ferrum logo in standby� It does not depend on the ambient sensor�
7�3�3�4 Ambient Sensitivity
Sensitivity of the ambient sensor used to change brightness of display and logo� Automatic brightness control
can be also disabled�
7�3�3�5 Screensaver
If you don’t do anything for the selected time the screen will turn o� This feature can be disabled�
7�3�3�6 Home Return Time
If you don’t do anything for the selected time the screen will return to Home Screen� This feature can be disabled�
To Next Page
Loading...
