user’s manual
WANDLA by Ferrum
13
7�3�4 CONTROL
Contains other settings
7�3�4�1 Trigger Direction
In this settings you can set direction of trigger:
● Input - external device can turn on/o the Wandla using trigger socket
● Output - Wandla can turn on/o external device using trigger connection
7�3�4�2 TV Control (CEC)
Here you can turn on/o CEC control� CEC allows your TV to turn on/o the Wandla�
7�3�5 ABOUT
7�3�5�1 Contact
Contains contact information to our company�
7�3�5�2 Device
It contains information about the currently installed firmware, serial numbers of the motherboard and SERCE
module�
Note. The serial number of the converter is located on a sticker located on the bottom of the device.
7�3�5�3 Restore
Here you can reset Wandla to factory settings�
8� MQA
Authentication Types
The color of the small spot next to the MQA logo indicates if the MQA stream is detected�
The spot glows green to indicate that the unit is decoding and playing an MQA stream or file, and denotes
provenance to ensure that the sound is identical to that of the source material�
To Next Page
Loading...
