Piano Body
Left/Right Foot Components
Left/Right Leg Bending
Foot Pedal Assembly
Flathead ScrewM6x25mm 16 Pcs
Back Panel
Phillips Screws M6x20mm 4 Pcs
INSTALLATION STEPSINSTALLATION STEPS
BODY ASSEMBLY INSTRUCTIONS
To ensure the correct assembly of the piano, read this manual carefully
before assembly and place the manual where it is readily available for
inspection.
Please remove the main unit from the box and remove the protective cover
and foam box.(Packacing and packacing materials must be kept for half a
month).
During assembly or handling, keep the device raised horizontally.
Be careful of handling, be careful not to pinch your hands, or drop the
device to your feet.
Before you screw the screw to the final position, gently tighten the screw
slightly more easily. Wait until the screw has entered aboutnormal time
and then increase the force.
Do not use excessive force when screwing to the final position of the screw,
which may damage the screw.
Ater tightening the screws, place the device in a flat and stable place. Do
not place it in a ftufy stall or on the ground. n this case, thepedals are
easily swayed, resulting in skin lesions.
Do not place the main body of the device directly on the floor. This will
damage the bottom of the interface and bracket, and damage the host's
bottom panel.
Open the box, check the box items, such as the screw package is
complete.
Caution:Be sure to install the pedal to support the bolt. The black plum
plastic part of the pedal support handle bolt should beunscrewed until it
touches the ground (This largest bolt is to play the role of supporting the
pedal force).
1 2
To Next Page
Loading...
