THREE PEDAL INTERFACE
Pedal Cable Interface
Foot Pedal
Minimum
Maximum
Master Volume
POWER CONNECTION
This chapter will introduce the function jacks related to the electronic piano
and give out some information before playing. Before opening the power
switch of the electronic piano, please read the following items.
1. Confirm whether the power switch is turned off, if it is not, please turn off the
power switch.
2. Connect the power cord, firstly insert the plug into the DC jack on the back of
the electronic piano then plug the other end of the power adapter into the
power outlet.
3. Before opening the power, adjust all volume controllers to the minimum.
4. When turning off the power of the electronic piano, first tune all volume
controllers to the minimum then turn of the power switch.
Note:
1.When you don't use the electronic piano,or when it thunders, please remove
the power plug.
2.Please ensure that the power supply voltage is 220V ±10% AC, too high or too
low voltage wil cause damage to the electronicpiano. And the power socket
should be a triangle, it should be grounded.
3.Do not remove the power cord from the power socket when the electronic
piano is still opened.
PREPARE BEFORE USE
5 6
To Next Page
Loading...
