Subject to change – 2009/06
2
Internet: www.festo.com/catalogue/...
Valve terminals type 32 MPA
Key features
Innovative Versatile Reliable Easy to mount
• Slim high -performance valves in
sturdy metal housing
• MPA1 flow rates up to 360 l/min
• MPA2 flow rates up to 700 l/min
• From the individual valve to the
valve terminal with multi-pin plug,
AS-interface, C PI and fieldbus
connections and control block
• Dream team: fieldbus valve
terminal suitable for electrical
peripherals CPX. This means:
– Forward-looking i nternal com-
munication system for actuation
of the valves and CPX modules
– Diagnostics down to the
individual valve
– Valves can be actuated with
or without (standard) isolated
electrical circuits
• Modular system offering a range of
configuration options
• Expandable up to 128 solenoid
coils
• Conversion and expansion possible
at a later date
• Further manifold blocks can be
assembled using just three screws
and sturdy separating seals on
metal separator plates
• Integration of innovative function
modules possible
• Manual regulators, rotatable
pressure gauges
• Proportional pressure regulators
• Additional air supply via additional
pressure zones using supply plates
• Wide range of pressures
–0.9 … 10 bar
• Wide range of valve functions
• Sturdy and durable metal
components
–Valves
–Manifoldblocks
–Seals
• Fast troubleshooting thanks to LEDs
on the valves and diagnostics vi a
fieldbus
• Extensive operating voltage range
±25%
• Ease of servicing through
replaceable valves and electronics
modules
• Manual override either non-detent-
ing, detenting or secured against
unauthorised activation (covered)
• Durable, thanks to tried and tested
piston spool valves
• Large and durable labelling system,
suitable for barcodes
• Ready-to-install unit, already
assembled and tested
• Lower selection, ordering, installa-
tion and commissioning costs
• Secure mounting on wall or H-rail
mounting
To Next Page
Loading...
