Need help?Do you have a question about the Festo 542898 and is the answer not in the manual?
Details on adjusting button, LED display, electrical connection, spring clip, wall support, and pneumatic connection.
Instructions for mounting wall supports and attaching the sensor.
Guidance on connecting pneumatic ports using screw connectors and tubing.
Details on connecting the electrical output, including pin assignments and cable colors.
Procedure for setting switching pressure for O/C variants using the EDIT button.
Steps for setting switching pressure with two teach pressures for specific variants.
Guide to selecting operating modes (1-3) for the FP variant via the EDIT button.
Procedure for setting switching pressure and hysteresis for FP variants.
Guidelines for cleaning the sensor using permitted cleaning agents.
Visual representation of mode display, selection, and switching pressure teaching.
Details on adjusting button, LED display, electrical connection, spring clip, wall support, and pneumatic connection.
Instructions for mounting wall supports and attaching the sensor.
Guidance on connecting pneumatic ports using screw connectors and tubing.
Details on connecting the electrical output, including pin assignments and cable colors.
Procedure for setting switching pressure for O/C variants using the EDIT button.
Steps for setting switching pressure with two teach pressures for specific variants.
Guide to selecting operating modes (1-3) for the FP variant via the EDIT button.
Procedure for setting switching pressure and hysteresis for FP variants.
Guidelines for cleaning the sensor using permitted cleaning agents.
Visual representation of mode display, selection, and switching pressure teaching.
General| Product Name | Festo 542898 |
|---|---|
| Category | Accessories |
| Nominal Size | 4 mm |
| Material | Polyamide |
| Color | Black |
| Product Weight | 0.02 kg |
| Weight | 0.02 kg |
| Material Housing | PA |
| Operating Medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
To Next Page
