Festo 527467 - User Manual

(de) Bedienungs−
anleitung
(en) Operating
Druck−/Vakuumsensor
Pressure/vacuum sensor
SDE5−...
704 803
0609a
US patent no. 6,429,548

Summary

Operating parts and connections

Product overview

Method of operation and use

Conditions of use

Areas of application and official certifications

Fitting

Fitting the mechanical components

Instructions for mounting the sensor's mechanical parts onto wall supports.

Fitting the pneumatic components

Guidance on connecting pneumatic tubing to the sensor's ports.

Fitting the electric components

Instructions for connecting the sensor's electrical components, including pin assignments.

Commissioning

Setting switching pressure for O;C types

Procedure to set the switching pressure for O/C type sensors using the EDIT button.

Setting switching pressure for C1;C2;C3;01;02;03 types

Setting switching pressures for specific sensor variants using teach pressures and the EDIT button.

Mode selection for FP type

Guide to selecting operating modes for the SDE5-...-FP-... sensor.

Switching pressure setting for FP type

Procedure for setting switching pressures for the SDE5-...-FP-... sensor using teach pressures.

Operation

Care and maintenance

Cleaning

Instructions for cleaning the sensor using a soft cloth and approved cleaning agents.

Dismantling

Accessories

Eliminating faults

Technical specifications

Appendix

Functions on the SDE5-...

Diagrams illustrating the functions and modes of the SDE5-... sensor.

Festo 527467 Specifications

General

Article number	527467
Color	Silver
Mounting position	Any
Material	Aluminum
Operating pressure	0 ... 10 bar
Ambient temperature	-10 ... 60 °C
Pneumatic connection, port 2	G3/8
Material of housing	Die-cast aluminum