Festo CMMS-ST-*-G2 Series User Manual

CMMS-ST-C8-7-G2
Festo – GDCP-CMMS-ST-G2-S1-EN – 1404NH – English 3
Table of Contents – CMMS-ST-C8-7-G2
1 Safety and requirements for product u s e 7......................................
1.1 Safety 7..................................................................
1.1.1 General safety instructions 7.........................................
1.1 .2 Intended use 7.....................................................
1.1.3 Foreseeable misuse 8...............................................
1.1.4 Achievable safety level, safety function in accordance with E N ISO 13849-1 8...
1.2 Requirements for product use 9...............................................
1.2.1 Technical prerequisites 9............................................
1.2.2 Qualification of the specialized personnel (requirements for the personnel) 9...
1.2.3 Diagnostic coverage (DC) 9...........................................
1.2.4 Range of application and certifications 10................................
2 Description of the safety function STO 11........................................
2.1 Product overview 11.........................................................
2.1 .1 Purpose 11........................................................
2.1.2 Interfaces 11.......................................................
2.2 Function and application 12....................................................
2.2.1 Description of the safety func tion STO 13................................
2.2.2 Over view of interfaces [X1] and [X3] 15..................................
2.2.3 Runtime performance 16..............................................
2.3 Switching example STO – “Safe Torque Off” 17....................................
2.3.1 Explanations of the switching example 17................................
2.3.2 STO request 18.....................................................
2.3.3 Restart after termination of the STO status 19.............................
2.3.4 STO timing diagram 20...............................................
2.4 Switching example SS1 – “Safe S top 1” 21.......................................
2.4.1 Explanations of the switching example 21................................
2.4.2 Request SS1 23.....................................................
2.4.3 Restart after termination of the SS1 function and S TO status 24..............
2.4.4 Timing diagram SS1 25...............................................
2.4.5 Parameterisation example 26..........................................
2.5 Testing the safety func tion 27..................................................
3 Mounting and installation 28..................................................
3.1 Mounting / dismantling 28.....................................................
3.2 Electric al installation 28.......................................................
3.2.1 Safety instructions 28................................................
3.2.2 Ports [ X1] and [X3] 29................................................

Festo CMMS-ST-*-G2 Series Specifications

General

Brand	Festo
Model	CMMS-ST-*-G2 Series
Category	Controller
Language	English