Need help?Do you have a question about the Festo CPX-FEC and is the answer not in the manual?
General| Brand | Festo |
|---|---|
| Model | CPX-FEC |
| Category | Controller |
| Language | English |
Lists the different operating modes: Stand Alone, Remote Controller, Remote I/O.
Describes programming using Festo Software Tools (FST) in STL or LDR.
Provides warnings and cautions before starting installation work.
Explains the function of the rotary switch for RUN/STOP control.
Lists connections and covers required to achieve IP65/IP67 protection.
Explains configuration using Festo Software Tools (FST) and Hardware Configurator.
Covers basic rules for addressing modules and default addressing ranges.
Explains how to set CPX terminal and module parameters.
Overviews diagnostic possibilities using LEDs, handheld, hardware configurator, and user program.
Explains the benefits of using Ethernet for plant automation and controller connectivity.
Describes Ethernet as a physical protocol and the role of TCP/IP in network communication.
States that CPX-FEC supports protocols and covers Ethernet connection.
Introduces the Webserver, how it provides data, and client access via browsers.
Explains the CPX-FEC's role in Remote Controller Ethernet mode via Ethernet.
Describes the CPX-FEC controlling the CPX terminal via a field bus node.
Explains CPX-FEC as a field bus slave on Ethernet, controlled via Modbus/TCP.
Details Modbus commands, address assignment, and data grouping for CPX terminal.
Lists general technical specifications, protection class, module code, and power supply.
To Next Page
