Need help?Do you have a question about the Festo CPX-CEC Series and is the answer not in the manual?
Detailed description of the Festo CoDeSys controller CPX-CEC, including its features and functions.
Introduction to CoDeSys provided by Festo for programming CPX-CEC controllers, its features and benefits.
Specifies supported functions and lists available libraries for the CPX-CEC controller.
Details prerequisites, PC preparation, and target system installation for the CPX-CEC.
Guide to configuring IP address and network settings for the CPX-CEC controller.
Settings for the target system, including parameters and manual I/O configuration.
Configuration steps for RS-232 interface and SoftMotion for CPX-CEC-M1.
Establishing Ethernet connection and determining network configuration for online operations.
Methods for diagnosing the CPX system, monitoring status, and handling errors in user programs.
Guidance on application programming, I/O updates, and using CANopen masters.
Legal terms and conditions for using Festo software packages, including rights and warranty.
Definitions of key technical terms used in the document for clarity.
Detailed description of the Festo CoDeSys controller CPX-CEC, including its features and functions.
Introduction to CoDeSys provided by Festo for programming CPX-CEC controllers, its features and benefits.
Specifies supported functions and lists available libraries for the CPX-CEC controller.
Details prerequisites, PC preparation, and target system installation for the CPX-CEC.
Guide to configuring IP address and network settings for the CPX-CEC controller.
Settings for the target system, including parameters and manual I/O configuration.
Configuration steps for RS-232 interface and SoftMotion for CPX-CEC-M1.
Establishing Ethernet connection and determining network configuration for online operations.
Methods for diagnosing the CPX system, monitoring status, and handling errors in user programs.
Guidance on application programming, I/O updates, and using CANopen masters.
Legal terms and conditions for using Festo software packages, including rights and warranty.
Definitions of key technical terms used in the document for clarity.
General| Type | Controller |
|---|---|
| Operating Voltage | 24 V DC |
| Communication Interfaces | Ethernet, Profibus, CANopen |
| PLC Functionality | Yes |
| Number of I/O Modules | Up to 8 |
| Relative Humidity | 5% to 95% (non-condensing) |
| Storage Temperature | -20 °C to +70 °C |
To Next Page