Need help?Do you have a question about the Festo CPX-CEC-C1 and is the answer not in the manual?
General| Product Type | Controller |
|---|---|
| Communication Protocol | EtherCAT |
| Number of I/O Modules | Up to 64 |
| Supply Voltage | 24 V DC |
| Protection Class | IP20 |
| Operating Temperature | 0 to 55 °C |
| Number of Ports | 2 |
| Number of Digital Inputs | Varies depending on modules |
| Number of Digital Outputs | Varies depending on modules |
Details the meaning of status LEDs (RUN, STOP, ERROR, TP, M, SF, PL, PS) for device monitoring.
Step-by-step guide for physically installing and removing the CPX-CEC-C1 controller.
Instructions for setting DIL switches for the CPX-CEC-C1, including CAN bus termination.
Guide on how to set the RUN/STOP rotary switch to control the device's operating state.
Technical pin allocation details for the CANopen interface connector on the CPX-CEC-C1.
Technical pin allocation details for the Ethernet interface connector on the CPX-CEC-C1.
Information on how the CPX-CEC-C1 controller receives power through the interlinking block.
To Next Page
