10 / 49 Festo 7DSBGa_en
2.3 Repair-relevant features
The ISO standard cylinder is equipped with repair-relevant and other, optional features.
These features are listed in the table with a page reference to the corresponding repair instructions.
Repair-relevant features (bearing cap variants) Other optional features Page
DSBG-... Standard version,
without repair-relevant feature
Q, L, U, L1, P, PPV, PPS, T, F,
A, N3, R3, P2, EX4, ...V, ...Y, V,
...E, ...L, ...S, M..., B1, B2, B3,
...LB2, ...LB3
22
DSBG-...-A3
Suitable for unlubricated operation
P, PPV, PPS, T, F, A, R3, ...V,
...Y, V, ...E, ...L, ...S, M..., B1,
B2, B3, ...LB2, ...LB3
DSBG-...-T1 (without A6)
Heat-resistant seals 0 to + 120 °C
DSBG-...-T4 (without A6)
Heat-resistant seals 0 to + 150 °C
P, PPV, T, F, A, N3, R3, ...V, ...Y,
V, ...E, ...L, ...S, M..., B1, B2,
B3, ...LB2, ...LB3
28
DSBG-...-T3 (without A6)
Resistant to low temperature – 40 to + 80 °C
P, PPV, T, F, A, N3, R3, ...V, ...Y,
V, ...E, ...L, ...S, M..., B1, B2,
B3, ...LB2, ...LB3
34
DSBG-...-A2
Hard scraper
P, PPV, PPS, T, F, A, N3, EX4,
...V, ...Y, V, ...E, ...L, ...S, M...,
B1, B2, B3, ...LB2, ...LB3
DSBG-...-A6 / T1-A6 / T3-A6 / T4-A6
Metal scraper
P, PPV, PPS, T, F, A, N3, ...V,
...Y, V, ...E, ...L, ...S, M..., B1,
B2, B3, ...LB2, ...LB3
41
To Next Page
Loading...
Need help?
General
