8 / 49 Festo 7DSBGa_en
1.5 Technical requirements
Note
The following instructions for safe and proper use must be observed:
– Observe the connection and ambient conditions specied in the technical data of the products and all the connect-
ed components. The product can only be operated in compliance with the relevant safety guidelines if you comply
with the limit values and load limits ( see enclosed documentation).
– The ISO cylinder must be in faultless technical condition.
– The ISO cylinder may only be operated in its original condition and without unauthorised modications.
– The ISO cylinder is designed for industrial use.
1.6 Standards and test values
Standards and test values which products comply with and full can be found in the “Technical data” sections of the
enclosed documentation.
To Next Page
Loading...
Need help?
General
