1 Introduction
1-1
Festo FED-... en 1107g
1 Introduction
1.1 Overview
This Installation Guide describes the main features of the FED
operator panels. The Guide refers to the following models:
FED-40 Operator interface with LCD graphic display
FED-50 Operator interface with LCD graphic display
FED-60 Operator interface with LCD graphic display
FED-90 Operator interface with LCD graphic display
FED-300 Operator interface with TFT 3”5 display
FED-301
FED-400
Operator interface with LCD 3”8 display
Operator interface with TFT 4”3 display
FED-500 Operator interface with LCD 5”7 display
FED-501
FED-550
Operator interface with LCD 5”7 display
Operator interface with TFT 5”7 display
FED-700 Operator interface with TFT 7”5 display
FED-710
FED-770
Operator interface with TFT 7”5 display
Operator interface with TFT 7” display
FED-1000 Operator interface with TFT 10”4 display
FED-1010 Operator interface with TFT 10”4 display
FED-2000 Operator interface with TFT 12”1 display
FED-2010
FED-3000
Operator interface with TFT 12”1 display
Operator interface with TFT 13” display
FED-5000 Operator interface with XGA TFT 15” display
FED-5010 Operator interface with XGA TFT 15” display
The product is suitable for use only for industrial purposes. In
residential areas, measures for radio interference suppression
may be necessary. The products have been designed in
compliance with the regulations:
– Emitted interference EN 61000-6-4
– Susceptibility to
interference EN 61000-6-2
In compliance with the above regulations the products are CE
marked.
To Next Page
Loading...